01.NEWEST HEATED SYSTEM
There’s nothing like a good, warm jacket to last you through the winter. While a nice down or insulated coat can go far, heated jackets take things up a notch. Many heated jackets have tri-zone heating area, waterproof, making them a good option for anyone who has to spend extended time in snow or rain.
Vinmori provides more. To better solve uneven heating problem, in 2019 we design a series of penta-zone heating apparel for people who needs specific body area to warm up. The smart switch control allows you to turn on/off the heated zone up to your personal needs. It’s a design full of human care and realistic needs, with adjustable heating zone, environment is no more a issue to be concerned as everyone can dedicate your body temperature anywhere.
02. SAFETY IS EVERYTHING
Why heated apparel safety matter?
Let’s start by covering the common concerns and myths of heated clothing. First off, your skin will never be in contact with any wires for the electrocution to be a hazard, but even if you do touch the heating element while current is passing through it, you will not feel anything. However, let’s assume all the safeguards standards are down and the heated apparel are made out of poor-quality metal wires construction, it may produce hot spots and inconsistent heating or overheating which may bring high fire burn risks.
Vinmori Revolutionary Safe Heating Technology
1)OVERHEAT & POWER SURGE PROTECTION
Safety is always a concern when it comes to using a heated vest. That’s why Vinmori has gone an extra mile to equip this high performance heated vest with a built-in NTC thermal protection module. The module enables the jacket to stop heating once it has overheated. For this reason, you will not be putting your safety on the line by wearing this heating apparel.
2)NEW THERMISTOR CONTROL SYSTEM
- HIGH EFFICIENCY
The temperature control system adopts high power design with overload current reaches 3.6 amps which ensure the heating panel can heat up quickly and reaches the highest temperature in 3 minutes.
New thermistor (NTC) temperature sensor can automatically detect the temperature of the heating panel every 0.3 seconds, in that way the heating panel can work at the specified temperature to avoid damage to the human body caused by excessive temperature.
Regardless of the external ambient temperature, NTC can guarantee heating panel reach the specified temperature precisely at 0.3℃
- DUAL PROTECTION
The temperature control switch is also equipped with an IC that can detect whether the thermistor (NTC) is working properly. If the thermistor (NTC) does not work or fails, the IC immediately terminates the power supply of the heater to prevent the temperature of the heater from being too high.
3)FOURTH GENERATION HEATING PANEL
- FAR INFRARED
Most of the heating infrared wavelength range from 2~10 um, which may cause heat dissipation if wear overload coat. In 2019, we adopt Toray carbon fiber from Japan to upgrade the heating panel wavelength to reach 3~14um.
- DUAL SECURITY
All carbon fiber are wrapped with PE film to ensure the circuit firmer and safer.
- HIGH HEAT CONVERSION EFFICIENCY
Given the fabric characteristics, the back spun lace is effectively insulated while the front silver cloth cant effectively dissipates heat, reducing heat dissipation on both sides, and efficiently transferring heat to the human body.
The conductive wire adopts TPE low temperature resistant material, which can effectively maintain the toughness and tensile strength of the wire under the low temperature environment of -40℃, and will not break off due to low temperature.